How Much Limestone for a 12×30 Driveway?
A 12 × 30 ft driveway (360 ft²) at 4″ deep needs 7.1 tons of crushed limestone — 4.44 yd³ net plus 10% waste. Order 7.25 t — quarries sell by the ton; a tri-axle carries about 20 tons per load.
12×30 at other depths
| Depth | Volume | Order (tons) | 50 lb bag (0.5 ft³) |
|---|---|---|---|
| 2″ | 2.22 yd³ | 3.5 tons | 132 |
| 4″ (this page) | 4.44 yd³ | 7.1 tons | 264 |
| 6″ | 6.67 yd³ | 10.6 tons | 396 |
Other driveway sizes
Order 7.25 t — quarries sell by the ton; a tri-axle carries about 20 tons per load.
- Area
- 360 ft²
- Volume (120.0 ft³)
- 4.44 yd³
- Net weight @ 1.45 t/yd³
- 12,889 lb · 6.44 t
- Waste / settling 10%
- + 0.64 t
- Order quantity
- 7.09 tons
- Truckloads
- 1 × tri-axle dump (≈20 t)
- Metric
- 3.40 m³ · 6.43 tonnes
- 50 lb bag (0.5 ft³)
- 264 bags
- Materials + delivery$25–$55 / ton · Sep 2026
- $266 – $484
- Installed (with labor)typ. $538
- $373 – $767
Quantities follow the ticket. Links may earn us a commission at no cost to you; they never change a number.
What will this limestone job cost?
See the installed price range for these quantities and get up to 3 quotes from local contractors. Free, no obligation.
Different size or depth?
Open the full limestone calculator to change every input, pick a material and see truckloads.
How to calculate crushed limestone by hand
Tons = Length (ft) × Width (ft) × Depth (in) ÷ 12 ÷ 27 × 1.45 t/yd³
Worked example
- Area: 50 ft × 12 ft = 600 ft².
- Volume: 600 ft² × (4 in ÷ 12) = 200 ft³ = 7.41 yd³.
- Weight: 7.41 yd³ × 1.45 t/yd³ = 10.7 tons.
- Compaction and waste 10%: 10.7 × 1.10 = 11.8 tons → order 12 tons, one tri-axle load.
- 1 ton #57 limestone at 4″
- ≈ 56 ft²
- 1 ton #57 limestone at 2″
- ≈ 112 ft²
- 1 yd³ crushed limestone
- ≈ 2,900 lb · 1.45 t
- Tri-axle dump
- ≈ 20 tons
Questions crews ask
How much limestone do I need for a driveway?
Square feet × depth in inches ÷ 324 gives cubic yards; × 1.45 gives tons. A 12 × 50 ft driveway at 4″ of #57 is 7.4 yd³ ≈ 10.7 tons; order 12 with compaction. For a new driveway lay 4–6″ of ¾″ minus first, then 2″ of #57.
How much does a ton of limestone cover?
About 56 ft² at 4″ deep, 75 ft² at 3″ and 112 ft² at 2″ for #57. Limestone is a little denser than granite gravel, so a ton covers slightly less than the 1.4 t/yd³ figures used for generic gravel.
What is #57 limestone used for?
#57 is ¾″ washed stone with no fines: driveway top course, drainage around pipes and foundations, under slabs and in French drains. It stays loose and drains. For a base that locks together use ¾″ minus or screenings.