How Much Limestone for a 12×20 Driveway?
A 12 × 20 ft driveway (240 ft²) at 4″ deep needs 4.7 tons of crushed limestone — 2.96 yd³ net plus 10% waste. Order 4.75 t — quarries sell by the ton; a tri-axle carries about 20 tons per load.
12×20 at other depths
| Depth | Volume | Order (tons) | 50 lb bag (0.5 ft³) |
|---|---|---|---|
| 2″ | 1.48 yd³ | 2.4 tons | 88 |
| 4″ (this page) | 2.96 yd³ | 4.7 tons | 176 |
| 6″ | 4.44 yd³ | 7.1 tons | 264 |
Other driveway sizes
Order 4.75 t — quarries sell by the ton; a tri-axle carries about 20 tons per load.
- Area
- 240 ft²
- Volume (80.0 ft³)
- 2.96 yd³
- Net weight @ 1.45 t/yd³
- 8,593 lb · 4.30 t
- Waste / settling 10%
- + 0.43 t
- Order quantity
- 4.73 tons
- Truckloads
- 1 × tri-axle dump (≈20 t)
- Metric
- 2.27 m³ · 4.29 tonnes
- 50 lb bag (0.5 ft³)
- 176 bags
- Materials + delivery$25–$55 / ton · Sep 2026
- $204 – $346
- Installed (with labor)typ. $384
- $275 – $535
Quantities follow the ticket. Links may earn us a commission at no cost to you; they never change a number.
What will this limestone job cost?
See the installed price range for these quantities and get up to 3 quotes from local contractors. Free, no obligation.
Different size or depth?
Open the full limestone calculator to change every input, pick a material and see truckloads.
How to calculate crushed limestone by hand
Tons = Length (ft) × Width (ft) × Depth (in) ÷ 12 ÷ 27 × 1.45 t/yd³
Worked example
- Area: 50 ft × 12 ft = 600 ft².
- Volume: 600 ft² × (4 in ÷ 12) = 200 ft³ = 7.41 yd³.
- Weight: 7.41 yd³ × 1.45 t/yd³ = 10.7 tons.
- Compaction and waste 10%: 10.7 × 1.10 = 11.8 tons → order 12 tons, one tri-axle load.
- 1 ton #57 limestone at 4″
- ≈ 56 ft²
- 1 ton #57 limestone at 2″
- ≈ 112 ft²
- 1 yd³ crushed limestone
- ≈ 2,900 lb · 1.45 t
- Tri-axle dump
- ≈ 20 tons
Questions crews ask
How much limestone do I need for a driveway?
Square feet × depth in inches ÷ 324 gives cubic yards; × 1.45 gives tons. A 12 × 50 ft driveway at 4″ of #57 is 7.4 yd³ ≈ 10.7 tons; order 12 with compaction. For a new driveway lay 4–6″ of ¾″ minus first, then 2″ of #57.
How much does a ton of limestone cover?
About 56 ft² at 4″ deep, 75 ft² at 3″ and 112 ft² at 2″ for #57. Limestone is a little denser than granite gravel, so a ton covers slightly less than the 1.4 t/yd³ figures used for generic gravel.
What is #57 limestone used for?
#57 is ¾″ washed stone with no fines: driveway top course, drainage around pipes and foundations, under slabs and in French drains. It stays loose and drains. For a base that locks together use ¾″ minus or screenings.