How Much Sand for a 30×30 Area?
A 30 × 30 ft area (900 ft²) at 2″ deep needs 7.9 tons of sand — 5.56 yd³ net plus 5% waste. Order 8.00 t — yards sell sand by the ton or ½ ton; most have a 1-ton minimum.
30×30 at other depths
| Depth | Volume | Order (tons) | 50 lb bag (0.5 ft³) |
|---|---|---|---|
| 1″ | 2.78 yd³ | 3.9 tons | 158 |
| 2″ (this page) | 5.56 yd³ | 7.9 tons | 315 |
| 4″ | 11.11 yd³ | 15.8 tons | 630 |
Other area sizes
Order 8.00 t — yards sell sand by the ton or ½ ton; most have a 1-ton minimum.
- Area
- 900 ft²
- Volume (150.0 ft³)
- 5.56 yd³
- Net weight @ 1.35 t/yd³
- 15,000 lb · 7.50 t
- Waste / settling 5%
- + 0.38 t
- Order quantity
- 7.88 tons
- Truckloads
- 1 × tri-axle dump (≈20 t)
- Metric
- 4.25 m³ · 7.14 tonnes
- 50 lb bag (0.5 ft³)
- 315 bags
- Materials + delivery$25–$60 / ton · Sep 2026
- $285 – $565
- Installed (with labor)typ. $602
- $403 – $880
Quantities follow the ticket. Links may earn us a commission at no cost to you; they never change a number.
What will this sand job cost?
See the installed price range for these quantities and get up to 3 quotes from local contractors. Free, no obligation.
Different size or depth?
Open the full sand calculator to change every input, pick a material and see truckloads.
How to calculate sand by hand
Tons = Length (ft) × Width (ft) × Depth (in) ÷ 12 ÷ 27 × 1.35 t/yd³
Worked example
- Area: 20 ft × 10 ft = 200 ft².
- Volume: 200 ft² × (2 in ÷ 12) = 33.3 ft³ = 1.23 yd³.
- Weight: 1.23 yd³ × 1.35 t/yd³ = 1.67 tons.
- Waste 5%: 1.67 × 1.05 = 1.75 tons → order 1.75 tons.
- Bagged: 35 ft³ ÷ 0.5 ft³ = 70 × 50 lb bags.
- 1 ton of sand at 1″ deep
- ≈ 240 ft²
- 1 ton of sand at 2″ deep
- ≈ 120 ft²
- 1 yd³ of dry sand
- ≈ 2,700 lb · 1.35 t
- 50 lb bag
- ≈ 0.5 ft³
Questions crews ask
How many tons of sand do I need?
Length × width in feet × depth in inches ÷ 324 gives cubic yards; multiply by 1.35 for tons of dry sand (1.4 for coarse concrete sand). A 20 × 10 ft area at 2″ is 1.23 yd³ or about 1.7 tons.
How much does a cubic yard of sand weigh?
Dry loose sand is 2,600–2,800 lb per cubic yard — about 1.35 tons. Wet sand can reach 3,000–3,200 lb. Quarries sell by the ton, so a damp pile gives you fewer cubic feet per ton.
How much sand do I need under pavers?
A 1-inch bedding layer of coarse concrete sand over a compacted stone base. Never bed pavers deeper than 1½″ — thick sand shifts. For 200 ft² that is 0.6 yd³, about 0.9 tons.